|
|
 |
 |
|
|
|
|
|
|
| Kategoria |
|
|
|
| Marka |
» Xecuter |
|
ArtID: |
CK3P2 |
|
| |
| CK3 Probe 2 |
| |
|
|
|
|
| Ceny znizkowe na CK3P2 |
| Ilosc |
Cena |
|
| 2 |
102,76 zł |
 ZAMÓW |
| 4 |
100,78 zł |
ZAMÓW |
|
|
|
|
| Use for dumping the 74850 key and enabling full firmware access of the new 83850V2 and 93450 drives. Completly solderless solution (if used with special conductive glue). |
|
After the amazing success of our LT Switch solution, we are pleased to launch the latest addition to the CK3 family of products - solution for the newer Liteon DVD drives – the CK3 Probe v2.
The CK3 Probe v2 is targeted at installers who require a multi-use solution to ALL versions Liteon drives – or to the users who simply don’t have the skills to solder themselves (can simply use compatible conductive glue, can be ordered separatly)
Still retaining the original CK3 Probe v1 function of dumping the 74850 key, but now also enabling full firmware access of the new 83850V2 and 93450 drives – you can easily switch between PROBE and MRA Modes – A complete all-in-one solution !
Liteon 74850 – No Cuts Required. No Rebuild PCB Required. Switch to original CK3 Probe Function for DVD Key Extraction
Liteon 83850V1 – Probe not required to read the DVD Key (Use latest Jungle Flasher)
Liteon 83850V2 – 2 Small Trace Cuts. No Rebuild PCB Required. Use conductive glue (can be ordered separatly) or solder to repair the traces.
Liteon 93450 – 2 Small Trace Cuts. No Rebuild PCB Required. Use conductive glue (ca be ordered separatly) or solder to repair the traces.
The First No-Solder Solution For ALL Liteon Drives including no trace cut for Liteon 74850 (if used with the special conductive glue)!
Original CK3 Probe Function (Liteon 74850 DVD Key) – No Trace Cutting !
New No-Solder LT Switch Probes (Liteon 83850V2 & Liteon 93450) – 2 x Small PCB Trace Cuts – Repaired With solder or special conductive glue (can be ordered separatly)
New ©MULTI-R Feature ! (Can switch between 18 Ohms, 20 Ohms & 22 Ohms for those stubborn 93450 drives)
Improved Liteon Winbond Chipset Support
Power / Status / Standby LED’s
New Protection Circuit To Protect Against Accidental Shortages (LED Permanent On Syndrome)
Fits to CK3 Lite, CK3 Pro, Blaster CK3 & Maximus Xtractor
Note that you will need to repair the cuts by soldering, or without soldering using special conductive glue - NOT included in this kit, may be ordered separatly, see below.
Installers can use this again and again and again and again – No rebuild boards – no soldering – NO PROBLEM !
The CK3 Probe 2 connects to both the CK3 Lite and CK3 Pro connectivity kits and includes full status LED’s and an extra protection circuit against accidental shortages on the DVD PCB.
Package content:
Xecuter Probe 2
Cable
If you need the special conductive glue for completly solderless solution please order it below. |
|
| |
| Inne produkty (do zamówienia oddzielnie): |
| |
 |
|
| Xecuter Connectivity kit v3 Lite for Xbox 360 |
|
|
| Include complete support for Liteon Drive Key Dumping. |
|
 JEST W MAGAZYNIE
|
|
|
| ------------------------------------------------------------------------------------------------------------------ |
|
 |
|
| Xecuter Connectivity kit v3 Pro for Xbox 360 |
|
|
| Include complete support for Liteon Drive Key Dumping. USB. |
|
JEST W MAGAZYNIE
|
|
|
| ------------------------------------------------------------------------------------------------------------------ |
|
 |
|
| XT (SATA/Power) PC Adapter for Connectivity Kit V3 |
|
|
| Fast and easy SATA and Power connection from PCs back panel. |
|
JEST W MAGAZYNIE
|
|
|
| ------------------------------------------------------------------------------------------------------------------ |
|
 |
|
| Xecuter LT Switch, enchanced version |
|
|
| Version 1.5. For use with Liteon 74850 83850 93450. New low price! |
|
JEST W MAGAZYNIE
|
|
|
|
|
|
|
