|
|
 |
| FAQ/SUPPORT - SUPPORT: EZ Tank storage/backup device |
|
 Zpowrotem na strone POMOC/SUPPORT. |
|
EZ Tank can be used as standard USB hard drive and as a stand alone backup device for most of digital cameras with USB connectors.
Make sure you have one FAT32 partition on the EZ Tank hard drive. You may have more partitions with other file systems (like NTFS) but only the first found FAT32 will be used for camera backups.
Using with PC:
When used with a computer please use the big USB connector at the back of EZ Tank. Make sure the switch is toward this connector. Do not use the smaller USB cable.
Using with digital camera:
When used with a digital camera (or other USB devices) use the small mini USB conector on EZ Tank ansd the think, big USB on PC, move teh swithc on teh back side of EZ Tank toward the smaller USB connector. Use the battery pack and make sure it's ON. Power on your digital camera and puch the small button on the backside of the EZ Tank to start copying all data from the cameras memory. The blue LED should start blinking (512Mb may about take 10 min). When teh operation s is completed make sure teh error LED is not blinking, if it is try again.
Please make sure you connect it to USB at the back of your computer.
Some times it is a powered USB hub needed (the EZ Tank need more power than some USB can provide).
Make sure you use short USB cables, best to use the one provided with EZ Tank.
It's a common issue that some times the computer can't find EZ Tank due to problems mentioned above.
Try to disconnect all other USB devices and try to use another USB port or/and another computer. |
|
|
|
