|
|
 |
| FAQ/SUPPORT - SUPPORT: Nintendo DS Chip Advanced+ |
|
 Zpowrotem na strone POMOC/SUPPORT. |
|
=> Installation diagram (jpg).
=> Installation image (jpg).
Chip commands:
Use these commands to toggle the different modes.
- Turn off/Reset: SELECT + X + Y (release SELECT, then release X + Y)
- Toggle Mode 1, Mode 2, Off: SELECT + X
- Toggle Mode 3, Mode 4: SELECT + Y
Operating the chip:
Turn the system on, and reset the chip (SELECT + X + Y).
- Mode 1: To map X/Y to R/L, press SELECT + X.
- Mode 2: Press SELECT + X again to map X/Y to A/B.
- Mode 3: To map X/Y to Turbo A/Turbo B, press SELECT + Y.
- Mode 4: Press SELECT + Y again to map X/Y to Turbo R/Turbo L.
- Off: Press reset to turn chip off again (SELECT + X + Y)
LED Indicator:
Depending on the mode, the Green and Orange LEDs of the system will change. Here are their setting depending on the mode:
Chip Off: Orange OFF, Green ON.
Mode 1: Orange OFF, Green OFF.
Mode 2: Orange OFF, Green OFF.
Mode 3: Orange ON, Green OFF.
Mode 4: Orange ON, Green ON.
While the DS Chip Advanced + is technically compatible and has been tested on the DS Lite, it simply cannot fit inside the console. Therefore, the chip is only compatible with the original Nintendo DS system. |
|
|
|
