|
|
 |
| FAQ/SUPPORT - SUPPORT: DS Linker |
|
 Zpowrotem na strone POMOC/SUPPORT. |
|
>> Official downloads.
>> DSLinker Operating System (070209).
>> DSLinker firmware update v1.23 (070209).
>> MoonShell v1.6 (070209).
>> DS Organize, PDS software (070209).
NOTE: If you have problems with DS Linker, folow these steps:
1. Full format your card
2. Use battery test software to test it
3. Make sure connectors (golden figers) are clean
4. Make sure it fits well into NDS, some time you may neeed to put small papper under to make better contact.
FAQ:
>> Official FAQ.
Q: How to upgrade DS Linker OS?
A: Please unzip it and copy the folder "DSYSTEM" to the Root of DSLinker.
Q: How to upgrade firmware?
A: New firmware update:
1. Copy it into the DSLinker, and run it like a game from DSLinker 3D Menu!
(For more detail, please check readme.txt file in the package.)
Old firmware update:
1. Please connect USB cable directly to the USB port on PC back panell, do not use any USB cable extensions.
2. Boot your NDS with DS Linker in Slot-1 and the other cart in Slot-2.
3. When you see the DSLinker start/game menu first please hold down "up+L+R" and than press "A+B" and hold it down untill you see on the lower screen "USB SAFE BOOT BLOCK(ADDR5)". Now you will enter the "upgrade mode".
4. Double click "NAND_8G_256K" (NAND_16G_256K for 16G DSLinker) to run upgrade program. Do not terminate the program during the upgrade!
5. Format DSLinker.
(thanks to Henrik Fridström for this info) |
|
|
|
