D2Sun chip v3.0 for Nintendo Wii + WiiClip

D2Sun chip v3.0 for Nintendo Wii + WiiClip

6 wires install, external switch, supports D2E chipset (and all older).6 wires install, external switch, supports D2E chipset (and all older).NEWS 10-17-2008:
D2SUN have update 5 new firmware for the D2SUN V2.x and V3.x , 3 firmwares for the DMS / D2A jumper bug fix, and 2 new firmwares for update the V3.04 / V3.05 to support ALL WII with 6 wires only!


Only 6 wires. External control board can enable/disable D2SUN and show the D2SUN working status, in real time. It is also upgradable via USB programmer.

6 wires install diagram for V3.x on the EPOXY D2E and D2C2 Wii:


NOTE: 6 wires install requires new firmware.

Features:

• Fast and easy installation on all models. Plug and Play in 2 minutes!
• Supports all chipsets DMS,D2A,D2B (including pincut), D2C, D2C2 and D2E 100% ALL-IN-1 solution.
• Supports the pins-cuted D2B Wii without grinding the chip, just place the clip on chip like other versions.
• Compatible with DVD+/-R, DVD+/-RW and Dual-layer 8.5G DVD (movies and GCOS)
• Come with 2~8Mbit on board SPI flash
• Come with 24M on board CLK, 100% work stable on all Wiis, without any CLK problem some other Mod- chips have
• Direct boot of Wii original and backup games from the same region
• Direct boot of Gamecube original and backup games from the same region
• Direct boot of different NTSC region Wii and GC games on USA and JAP consoles
• Partial region free support on Wii and GC original and backup games with different video mode (ie PAL<->USA, JAPAN,KOR)
• Improved read settings for recordable media
• Supports running GC games at Wii disk speed
• GC Audio streaming Fix
• Supports full-size DVD and DVD9 discs for GC homebrew
• Supports GC multigame discs
• Supports Wii and GC multidisc games
• Does not modify RAM, making it virtually undetectable for the Wii
• Compact design, best quality components, rock solid high speed controller
• High speed and high secure Actel FPGA
• Two LEDs indicate the D2SUN working status
• Professional ESD packing
• Come with external control board, can enable/disable D2SUN chip, and can check the D2SUN working status in real time
  
  Package contents:
• 1 x D2Sun v3 chip
• 1 x External PCB/Switch
• 1 x WiiClip v12
• 1 x flat cable (for external switch)
• 1 x flat cable, v2 (new 10 pint FPC for the programmer)
  
  
  
  
  
  >> Install diagram.
  
  >> FPC diagram (how to connect the cables).
  
  
  
  
  Note: Soldering must be done by you, we ship WiiClip and D2Sun chip without soldering.
  
  
  NOTE! If your Wii serial number is LEH-224 or higher the chipset is covered with epoxy. It is not so easy to remove it to fit the Wii Clip, only for experienced users.

Write a review