Maximus 360 LiteKey (Xtractor pro addon)

Maximus 360 LiteKey (Xtractor pro addon)

This device will help home users to do the firmware reading on the latest Liteon drives (83850V2 & 93450).In stock version 1.3

The best of all is once installed this device can be made undetectable!

Maximus 360 Litekey will put you at ease for those hard to do 83850c v2 and 93450 Lite-On Drives.

While the Vempire can be reused to flash many DVDs, the Litekey is intended to be used on one DVD, best suited for home users.

If you are end-user - we recommend to use Litekey. It is intended for end users who want to install a device on their drives that simplify their lifes on future updates without having to re-open the drive, their main worry is about enjoying the console, they should not be bothered about plugging, wiring, switching, every time they update.

If you are a proffesional installer - we recommend the Vampire. It is a re-usable tool. It require some more care and some extra steps to do the updates on the future.

The Maximus 360 LiteKey is based on the concept discovered by MRA. When using it you will still need to cut a couple of traces on the Dvd drives board and install the lite key to enable the reading and writing of the new liteons LT (litetouch) firmware.

You can do the same without any device and with a couple of wires, switches and a resistor but the extra benefit of installing this device is that you dont have to disassemble your dvd drive again to do the reading/writing of your drives firmware.

It is the first available device that incorporates a "SMART MTK MODE" to use it you just need to boot your drive with tray open and the maximus 360 litekey will put the drive in MTK vendor mode, where you can then do the reading and flashing of your drives firmware.

It is also compatible with jungleflasher or Dos and incorporates a disable feature wich puts the device into deep sleep mode and will not enter MTK mode untill you re-enable it.


Features fo Maximus 360 LiteLey:

• ORIGINAL DESIGN BASED ON THE MRA CONCEPT
• SMART MTK MODE, NO NEED TO OPEN DRIVE TO FLIP ANY SWITCH, JUST BOOT YOUR DRIVE WITH TRAY OPEN
• REBUILD BOARD AT 100%
• ZERO INTRUSION TO THE DRIVE WHEN IN "NORMAL MODE"
• UNDETECTABLE WHEN PLACED IN DISABLED MODE
• ALLOWS DISABLE/RE-ENABLE WITHOUT OPENING YOUR DRIVE CASE AGAIN !!
• COMPATIBLE WITH LATEST DOSFLASH AND JUNGLEFLASHER
• VISUAL MODE INDICATORS
• PERMANENT-ENABLE MODE
• MINIMAL CURRENT CONSUMPTION
• QUICKSOLDER PADS (NOOB FRIENDLY)
• HIGH QUALITY MATERIALS
  
  NOTE: It is recommended that if you use iXtreme LT you do a 100% dump of all Lite-On drives. Once you convert your Lite-on to firmware LT, any future upgrades require a full dump. If your drive is STOCK you should do a full dump to return your laser calib data.
  
  LED Indicators:
  * GREEN - DRIVE BOOTED WITH TRAY CLOSED, LITEKEY SLEEPS AND ALLOW NORMAL DRIVE OPERATION
  * RED - DRIVE BOOTED WITH TRAY OPEN AND LITEKEY STARTED MTK VENDOR MODE
  * GREEN-RED - THE DRIVE STARTED WITH TRAY OPEN BUT LITEKEY IS DISABLED, ALLOW NORMAL DRIVE OPERATION
  
  This package includes:
• 1 x Maximus 360 LiteKey
  
  
  NOTE: Return policy for all flashing tools and similar tools:
  NO returns and refounds, only exchange if deffective.
  
  
  

Write a review