822 products in our shop!
Categories
10 years anniversary!
twitter
Follow shop01media on Pinterest
facebook
team-executer-reseller
Sky3DS
Gateway
supercard
r4-3ds
Cobra
x3key
hd-fury
Out of stock!
Enter your email to be informed when this product arrives:


Send Close
Out of stock!
Enter your email to be informed when this product arrives:
Send Close
Credit Card payments
World Wide Shipping
World Wide Shipping
Category           » XBOX 360  / Sony® PS3  / Mod chips  / Mod Tools  / PC Accessories  / Development Boards  / Development mods
Brand           » Other

ProgSkeet PCB v1.21 Black Tar Edition, NAND/NOR Flash programmer, inc. USB programmer

Temporary Out Of Stock
70.49 €
Product Code: PrSk121
Weight: 0.05kg

ProgSkeet PCB v1.21 Black Tar Edition, NAND/NOR Flash programmer, inc. USB programmer

ProgSkeet is your one and only solution to your flashing needs. Whether it is NAND, NOR or any other kind of non-volatile memory - just solder, plug in and operate!ProgSkeet is your one and only solution to your flashing needs. Whether it is NAND, NOR or any other kind of non-volatile memory - just solder, plug in and operate!>> Check your PS3 SKU Models & Regioning"

Cost-effective alternative to industrial programmers.

NEW VERSION 1.21

Compared to V 1.2 the only diffarance is the new golden solder points and contacts.

Compred to V 1 this new progskeet version introduce these changes:

1- Redesign of main board now more small and stable (4 layers)
2- Slave baord with USB, LED, SWITCH (for memory banks selection)
3- FCC cable 15 pins that allow to connect externally the slave board
4- Bus SPI on FCC cable for future expansions
5- 100% support of WINSKEET
6- DLL OPEN library to allow integration in other alternative programs

This programmer is intended for three main purposes:

  • Industrial: programming large amounts of NAND / NOR / EEPROM IC in electronics production.
  • Educational: understanding of and experimenting with devices as described by EUCD and DMCA.
  • Repair/Recovery: reprogramming onboard memory using vendor firmware due to prior update fault.

    NOTE - 360-clip: (2013-08) Progskeet does support 36-clip but its right now not good support.

    Progskeet support now perfectly both NAND and NOR.






    NOTE: PROGSKEET chip are sold EMPTY. All progskeet users from today need to have also the USB programmer INCLUDED in this kit to enjoy all the feature of PROGSKEET V1.2/1.21.

    Remember - for accuracy and speed, choose ProgSkeet!

    The kit include:
    1x PROGSKEET 1.21 + SLAVE BOARD
    1x FFC flat cable (to use between the progskeet and the slave board or the programmer)
    1x PROGSKEET ADAPTOR PCB BOARD
    1x USB JTAG programmer Injectus






    Example of application: reflashing PS3. Optionally but recommended parts:

    1. 360-Clip, solderless IC adapter (for NAND consoles) (TW_100)
    2. ProgSkeet dual adaptor PCB kit, with FCC cables (for NAND consoles) (PrSkAdp)
    3. 360-Clip, NOR 56-pin, solderless IC adapter (for NOR consoles) (TW_1102)




    Beside software-side updates, you can also expect hardware updates powered by customer requests!

    With a broad range of applications, such as EEPROM programming (among others: Altera, Lattice FPGA/CPLD), Bad flash recovery, more commonly known as "Unbricking" (Modems, video cards, cell phones, music players) and plain serial programming (manufacture of your own device).

    Supported devices include, but are not limited to: K9F1G08, S29GL128, K8Q2815, HY27US08.

    Industrial programmers often range in the EUR 1000+ range with limited customer support. ProgSkeet can compete with these programmers all the while maintaining low cost!


    NOTE: Do not forget to order JTAG USB programmer! See below.

    >> Official support forum
    >> Official downloads

    >> Read more at PS3hax!

    >> Read more at Console Crunch!

    Designed for Xbox 360, Wii, PS3 that are already supported.

    Including support for PS3s that have two NANDs onboard, and now supports flashing for Wii consoles as well!


    The team said that other devices will be supported later as satellite receivers dreambox. So this will allow you to retrieve an image or flash memory of your console, but also debricker your console or to the Dual-NAND.
     
  • High quality 2mm PCB
  • Solder treated
  • Very high dump speed!
  • ZIP 50 pin connector onboard


    NOTE: Remember that using PROGSKEET with solderless kit requires ACTEL PROGSKEET firmware vers. 111126 or later. The firmware is always available for download on the DOWNLOAD area of progskeet website.


    The update of ACTEL progskeet is possibile with INJECTUS programmer only.





    Before proceeding to buy ProgSkeet, please consult local as well as international laws to determine whether or not your intended use is legal under aforementioned legislations.

    *** NOTE! Return policy for this kind of products - no return possible. We exchange it for new one only if the hardware is deffective. If you cant use it please search more info on the internet. The features and software is constantly developing, improving and changing. ***

    *** Ej öppet köp! Ingen returrätt på dessa verktyg, dvs du kan inte köpa verktyget, använda det en gång och sedan returnera den. ***

 

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below:



This site and all contents are © 2002-2009 01Media.
All Registered Trade Marks used on this Website, whether marked as Trade Marks or not marked, are declared to belong to their respective owner(s).