566 products in our shop!
Categories
10 years anniversary!
twitter
Follow shop01media on Pinterest
facebook
hd-fury
Out of stock!
Enter your email to be informed when this product arrives:


Send Close
Out of stock!
Enter your email to be informed when this product arrives:
Send Close
World Wide Shipping
World Wide Shipping
Category           » XBOX 360  / Repair parts & tools
Brand           » Xecuter

Xecuter CK3 Probe 2

In Stock
20.99 €

2 or more 19.99 €
Xecuter Product Code: CK3P2
Weight: 0.019kg

Xecuter CK3 Probe 2

Use for dumping the 74850 key and enabling full firmware access of the new 83850V2 and 93450 drives. Completly solderless solution (if used with special conductive glue).Use for dumping the 74850 key and enabling full firmware access of the new 83850V2 and 93450 drives. Completly solderless solution (if used with special conductive glue).

Official Xecuter distributor


NOTE:Can be used with the Probe 3 cables and get exact same functin as the new Probe 3!


After the amazing success of our LT Switch solution, we are pleased to launch the latest addition to the CK3 family of products - solution for the newer Liteon DVD drives – the CK3 Probe v2.

The CK3 Probe v2 is targeted at installers who require a multi-use solution to ALL versions Liteon drives – or to the users who simply don’t have the skills to solder themselves (can simply use compatible conductive glue, can be ordered separatly)

Still retaining the original CK3 Probe v1 function of dumping the 74850 key, but now also enabling full firmware access of the new 83850V2 and 93450 drives – you can easily switch between PROBE and MRA Modes – A complete all-in-one solution !




  • Liteon 74850 – No Cuts Required. No Rebuild PCB Required. Switch to original CK3 Probe Function for DVD Key Extraction
  • Liteon 83850V1 – Probe not required to read the DVD Key (Use latest Jungle Flasher)
  • Liteon 83850V2 – 2 Small Trace Cuts. No Rebuild PCB Required. Use conductive glue (can be ordered separatly) or solder to repair the traces.
  • Liteon 93450 – 2 Small Trace Cuts. No Rebuild PCB Required. Use conductive glue (ca be ordered separatly) or solder to repair the traces.
     
  • The First No-Solder Solution For ALL Liteon Drives including no trace cut for Liteon 74850 (if used with the special conductive glue)!
  • Original CK3 Probe Function (Liteon 74850 DVD Key) – No Trace Cutting !
  • New No-Solder LT Switch Probes (Liteon 83850V2 & Liteon 93450) – 2 x Small PCB Trace Cuts – Repaired With solder or special conductive glue (can be ordered separatly)
  • New ©MULTI-R Feature ! (Can switch between 18 Ohms, 20 Ohms & 22 Ohms for those stubborn 93450 drives)
  • Improved Liteon Winbond Chipset Support
  • Power / Status / Standby LED’s
  • New Protection Circuit To Protect Against Accidental Shortages (LED Permanent On Syndrome)
  • Fits to CK3 Lite, CK3 Pro, Blaster CK3 & Maximus Xtractor

    Note that you will need to repair the cuts by soldering, or without soldering using special conductive glue - NOT included in this kit, may be ordered separatly, see below.

    Installers can use this again and again and again and again – No rebuild boards – no soldering – NO PROBLEM !

    The CK3 Probe 2 connects to both the CK3 Lite and CK3 Pro connectivity kits and includes full status LED’s and an extra protection circuit against accidental shortages on the DVD PCB.

    >> How to flash Liteon 74850C


    NOTE: Return policy for all flashing tools and similar tools:
    NO returns and refunds, only exchange if defective.


    Package content:
  • Xecuter Probe 2
  • Cable

    If you need the special conductive glue for completly solderless solution please order it below.

 

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below:



This site and all contents are © 2002-2009 01Media.
All Registered Trade Marks used on this Website, whether marked as Trade Marks or not marked, are declared to belong to their respective owner(s).