This is stand alone version - programmer and one cable only. Superfast, NANDS PRO compatible, easy to use and upgradable.
Rock Solid 60Mhz ARM Controller
Easy Install System for both NAND and JTAG
Built-in Programmer For Future NAND-X Firmware Upgrades (Windows App Available)
Add-on Expansion Socket Included
Proven Technology – Based On NAND Pro Design
100% Compatible with NAND Pro v2.0e
NAND-X Pin Header Cable (Can Also Use without Pin Headers As A Wires Only Cable*)
Optional parts, can be ordered separatly:
NAND-X QSB Install Cable
JTAG NON-XENON Cable
JTAG XENON Cable
NAND-X QSB J1D2
NAND-X QSB J2B1
JTAG J1F1 QSB (XENON Only)
JTAG J2D2 QSB (All Motherboards)
QSB for XB360 Slim are NOT included, can be ordered separatly.
If you want to install the NAND-X using the QSB (Quick Solder Board) System then you need parts #4, #7 and #8. You do not need part #3. (RECOMMENDED METHOD)
If you want to install the NAND-X using the Pin Header System then you need part #3. You do not need parts #4, #7 and #8.
If you have a Xenon motherboard, then for JTAG you need parts #6, #9 and #10. You do not need part #5.
If you have a Non-Xenon motherboard, then for JTAG you need parts #5 and #10. You do not need parts #6 and #9.
*If you want to cut off the pin header connector on Cable #3 then the wire colors are:
J1D2.1 = Black
J1D2.2 = Brown
J1D2.3 = Red
J1D2.4 = Orange
J1D2.5 = Yellow
J2B1.6 = Green
J2B1.5 = Blue
>> Nand-X solder points for slim
>> Nand-X full installation diagrams, instructions and drivers.
Video tutorial: how to program the coolrunner with timing files for the reset glitch hack using your nandx, nandx to coolrunner cable and Coolshrimps software.
NOTE: Return policy for all flashing tools and similar tools:
NO returns and refounds, only exchange if deffective.