J-R Programmer v2, NAND flasher, USB

J-R Programmer v2, NAND flasher, USB

You can also order here a similar replacement programmer NAND Key.

Fast NAND JTag SPI reader / programmer. Includes full POST monitoring for the CR3 Pro rater feature. Speed enhancements are also included that puts it within 30 seconds of the high speed NAND-X.Fast NAND JTag SPI reader / programmer. Includes full POST monitoring for the CR3 Pro rater feature. Speed enhancements are also included that puts it within 30 seconds of the high speed NAND-X.NEW 2 Version with Full POSt Monitoring and CR3 Pro Rater Support. Also includes speed enhancements (2-3 minutes faster than JRP v1 !)

The new TX J-R Programmer V2 has been created to cater to the budget conscious and coded to work hand in hand with the latest version of the J-Runner app.

A third of the size of the TX NAND-X and optimized to run faster than any other USB-SPI based tool (Example Speeds: Others average 16M read 7m 20s, JRP v2 average 16M read 3mins), this nifty tool can fully read/write NAND over SPI, program CoolRunners or any Xilinx based RGH device over USB and also able to program onboard sounds using the TX SONUS 360 !

Complete with a CR JTAG cable so you simply plug n program without any soldering using the latest J-Runner App (needs to be at least Build 283). Also comes with NAND installation wires that have the connectors that are compatible with the NAND-X QSB boards. If you dont use the QSBs you can simply cut off the connectors and do a normal wires only install.

The J-R Programmer V2 is also fully upgradeable and can be programmed using the Xecuter X360USB PRO Update app. Onboard LEDs indicate Power and BootLoader mode.

RED LED: Bootloader Mode (Switch to the left)
GREEN LED: J-R Programmer Mode (Switch to the right)
RED LED FLASHING: R/W Activity & POST Activity (Switch to the right)

Features:

• Fast NAND Programming
• Fast XILINX CR JTAG Programming
• Compatible with all CoolRunners inc the new CR3 Pro
• Supports Full Post Monitoring
• Compatible with both Phat and Slim
• Onboard LEDs indicate Power & Data
• Easy Install System
• Compatible with All NAND-X QSBs
• Includes Cable For QSB V3 Kit or Wires Install (QSB V3 Kits Sold Separately)
• Includes Cable For Xilinx CRJTAG
• Includes Cable for Xecuter Sonus 360 (Sonus 360 QSB Sold Separately
• Trinity Kit or Corona Kit)
• Includes KIOSK option for Remote On
• Built-in Programmer For Future Firmware Upgrades
• Designed for the latest J-Runner App (Build 283+)
• Rock Solid Design Tested by the J-Runner Team
• Supports New QSB V3 Kits (Solder Separately)
• Supports Sonus 360 Programming
• Affordable We Provide You With More For Less !
• High Quality & Trusted TX Design
  
  Included in teh kit:
• J-R Programmer
• NAND Cable Set (Can fit to optional QSB or cut use as wires install)
• CoolRunner JTAG Cable Set

Write a review