Maximus Vampire (Xtractor pro addon)

Maximus Vampire (Xtractor pro addon)

This device will help professional installers to do the firmware reading on the latest Liteon drives (83850V2 & 93450).This device will help professional installers to do the firmware reading on the latest Liteon drives (83850V2 & 93450).Update 2010-04: We confirm that Vampire works with all Winbond Chipset Liteon Drives.

Its based on the MRA concept and 100% compatible with all Xtractor units, it connects directly on the Xtractor pin port. It came with 2 visual indicators, one for polarity check and other for Vendor Mode.

The Vempire can be reused to flash many DVDs, while the Litekey is intended to be used on one DVD.

If you are a proffesional installer - we recommend the Vampire. It is a re-usable tool. It require some more care and some extra steps to do the updates on the future.

If you are end-user - we recommend to use Litekey. It is intended for end users who want to install a device on their drives that simplify their lifes on future updates without having to re-open the drive, their main worry is about enjoying the console, they should not be bothered about plugging, wiring, switching, every time they update.


Information about the rebuild board - do you remember having to wire up the traces that you cut at the beginning of the MRA method to read the Liteon Firmware?

This board can be used to avoid doing that re-wire, while the use of this board IS NOT REQUIRED to use the Vampire, but the use of this board will simplify the full mod procedure, and it has a couple of extra features like making easy access to the probe spots for the vampire and at the end of the job you can choose route the PIN 101 to the power connector of the drive for future updates without re-open (with an upcoming tool).

Simply use the rebuild board from the beginning of the installation and we are sure you will find it useful.

Note: The issues with this batch are fixed, the holes are filled to avoid the problems.

Check our support page for manuals, one for the use of the "Vampire with the rebuild board" (recomended) and other for using the "Vampire Standalone".

This package includes:

• 1 x Protection Foam Pad
• 1 x Vampire tool
• 1 x Cable kit
• 2 x Rebuild boards
  
  Note: More rebuild boards can be acquired in affordable packs, look below.
  
  
  
  
  
  
  

Write a review